|
32 CHROME FULL FENDERS WITH LIGHTS
| |
|
Low Light Fenders with 3 angled oval lights
|
High Light Fenders on a Stainless Steel Panel
|
|
Low Light & High Light
Fenders
These
two styles of fenders have the same unique features as
our
full fenders but with light boxes molded directly
into the fender.
The High Light Fenders have enough
room for 3 round or rectangle lights.
The Low Light Fenders have room for 3
round, rectangle, or oval lights set at an angle.
|
|
|
These lighted fenders have the light
box enclosed in the rear so your tires are not throwing
debris at your lights or wires. We offer a wiring
harness to fit these fenders. It comes in three
sections, 2 fender harnesses and 1 "Y" truck harness.
This will plug directly into your existing harness, then
"Y" off to each fender and a center light panel if need
be. Where each harness connects to the fender is a twist
coupler, this lets you disconnect the wires to remove
the fenders without cutting any wires. (Not available
for Canadian axle spacing.)
Lights are not included in the price,
however, we have LED lights available upon request. |
|
Gel Coat Colors
Painting
The
black and white gloss gel coat can be waxed and installed
without painting. If your fenders need to be painted to
match the color scheme of your truck we recommend painting
the sandable, gray primer gel coat fenders.
 |
Tubular
steel with 1/4" wall |
|
|
Flat
plates 3/8" thick |
|
|
Gusseted
corners |
|
|
Mitered
cuts |
|
|
Capped
ends |
|
|
Grade 8 &
stainless bolts included |
|
|
Built
Tuff - Built to
Last |
|
|
Available
with Standard (52") axle spacing. |
|
|
Weight:
275 pounds per set (including brackets)
(Approximate) |
Complete
step by step instructions (with pictures) are included with each
kit. Please note that due to the variations in each truck,
final installation requires drilling into the frame and welding.
No
mud flaps are not required on W.T.I. Fenders, however if you
would prefer to have mud flaps we have a mud flap bracket
available. They are welded on to the bottom of the rear fender
bracket.
We
offer technical support by phone at 920-822-2465 during regular
business hours.
Please note...... the wiring harness and lights are
NOT included in the price of the light panel fenders.
| High Light Panel
Fenders w/brackets |
| Low Light Panel Fenders
w/brackets |
| |
| Wiring Harness |
| Peterson LED's |
| Peterson sealed beam lights |
| |
| Mud Flap Brackets |
Prices are subject to change.
US Dollars
Recommended 5th Wheel Height for all W.T.I.
Fenders
(measure from ground to top of fifth wheel)
|
If
you have: |
| 22.5 low pro tires |
48"
|
| 22.5 standard tires |
49"
|
| 24.5 low pro tires |
49"
|
| 24.5 tall rubber |
51"
|
This is the minimum height we recommend.
This does not guarantee you will not hit the fenders with
the trailer, but in our experience it has been sufficient.
The higher the 5th wheel the better!
FULL FENDERS WITH LIGHT
HOLES
ALL
BRACKETS $ 1,999.95 PAIR
|
CHROME SHOP
1-800-573-2471
